I. Product introduction
      HSC6882V2 battery inspection and acquisition module can detect 31battery voltage, and pass the detection data throughRS485communication port upload. It uses The rail-mounted industrial control case is small in size and light in weight, and can be installed near the battery pack to achieve local acquisition of voltage and temperature. It has the advantages of simple wiring, strong anti-interference ability, and high acquisition accuracy.
      HSC6882V2 battery inspection and acquisition module can be selected by jumper and can be collected2V,6Vor < /span>12V, which realizes the unification of modules. The over-input protection circuit is added inside, and it will not be damaged in case of wrong wiring. Wide operating power range, can be used for 48V、110V、220Vsystem.
Second,Features

1. The voltage measurement accuracy of any channel can actually reach level 0.1 (0.06% limit+ 0.04%Actual value):

     2V Limit Measurement Range: 0.1V ~2.7V;

     6V Limit Measurement Range: 0.2V ~7.8V;

     12V limit measurement range: 0.3V ~15.8V;

2. The displayed value is stable and true, completely eliminates the influence of floating pressure and the interference of power frequency beat frequency, and the accuracy is at the leading level in the same industry;

3. The input, output and control loops have strong anti-interference ability. The common mode and differential mode anti-full pulse interference ability reaches 4.4KV;

4. Communication wave Bit rate 9600BPS;

5. The power consumption is less than 1W, so there is no heating device in the module, which is stable and reliable;

6. The data collection time interval is 42S;

7. The communication is stable and reliable, almost no frame is lost;

8. Input voltage range: AC170V ~ 264V; DC80V ~ 320V;

9. One module can detect 2V/6V/12V single battery voltage, one module can detect 31 batteries, and 248 batteries can be detected after the modules are connected in series;

10. One 485 interface: baud rate 9600bps, CLP90 (internal company) communication protocol.